Baja-motorsports X250 User Manual download pdf (Page 18)

OPERATION

WARNING

Never start engine without ﬁrst performing a pre-ride inspection

Failure to perform a pre-ride inspection could result in severe injury or death.

Always perform pre-ride inspection before every ride and correct any

problems.

CAUTION

Verify oil level prior to starting.

Starting the engine with low or no oil will damage the engine.

WARNING

Never start the engine in a closed place as the exhausted fumes from vehicle

contains toxic carbon monoxide.

STARTING ENGINE

1. Set the ignition key switch to “ON” position.

2. Set the handlebar ON/OFF switch to “ON” position.

3. Put dirt bike in neutral gear.

4. Ensure that there is fuel in tank.

5. Set the fuel valve lever to “ON” position.

6. If engine is cold, place choke lever in up (closed) position.

7. Start engine with electric start or kick start lever.

8. Once engine has started, slightly turn throttle twist to increase rpm’s to warm

engine. Do not fully open throttle to warm engine.

9. Once engine has sufﬁciently warmed up, place choke lever in down (open)

position.

Procedures for stopping the engine:

Release throttle twist grip to slow down engine.

Shift to neutral position.

Set ignition switch to “

” (OFF) position.

Set fuel valve handle to “OFF” position.

CAUTION

The engine can only be started in neutral gear.

Unnecessarily increasing RPM’s to a high level while the dirt bike is in

neutral is harmful to engine.

Closed

Open

choke lever

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

No comments

Baja-motorsports X250 User Manual Page 18